aph0025
11-12 10:36 AM
Thanks a ton, edaltsis. Do you happen to know any good lawyer in and around Dallas? Or anywhere for that mater, who can handle this issue with ease? I did speak to a couple of them here, but I did not get a good feeling about my case from them.
wallpaper The alphabet graffiti tag is
vaishnavilakshmi
11-13 09:08 PM
Hi Guys,
I verified my 485 Application status online and this is what I found can you guys tel what could this mean.
My I140 is not approved yet.
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Document mailed to applicant.
Hi,
As far as forum knowledge,Usually 485 approval updates would be either we sent u a welcome notice or approval notice sent or card production ordered etc.But when document mailed etc,i think it might be a RFE on ur 485 or may be ur AP document(by mistake,updated on ur 485).If u r extreme lucky,it could be ur GC!!!!
Anyway wish u goodluck,
Please update ur post when u recieve the document mailed by USCIS,
thanks,
lakshmi
I verified my 485 Application status online and this is what I found can you guys tel what could this mean.
My I140 is not approved yet.
Application Type: I485, APPLICATION TO REGISTER PERMANENT RESIDENCE OR TO ADJUST STATUS
Current Status: Document mailed to applicant.
Hi,
As far as forum knowledge,Usually 485 approval updates would be either we sent u a welcome notice or approval notice sent or card production ordered etc.But when document mailed etc,i think it might be a RFE on ur 485 or may be ur AP document(by mistake,updated on ur 485).If u r extreme lucky,it could be ur GC!!!!
Anyway wish u goodluck,
Please update ur post when u recieve the document mailed by USCIS,
thanks,
lakshmi
simple1
07-26 04:24 AM
In India 3 year grad are arts, humanities, science, management and accounting.
while 4+ year degrees are for technology, engineering, agriculture, medicine.
UK (some parts of europe as well) and Australia seems to have similar system in some of its university.
even some US universities have rightly adopted the same
fsu.edu | degree in 3 (http://www.degreein3.fsu.edu/)
Degree in Three Program Description (http://www.ecu.edu/threeyeardegree/)
Panola College Degree in 3 Program (http://legacy.panola.edu/instruction/degree_3/index.html)
The point is the content is more important than the duration.
I personally think 3year UG unlikely reason for reopening I140 after GC is approved. I would be shocked if that is the case.
I am afraid this could be a paper chase. Asking more docs to creating headache for the applicant.
U.S. steps up H-1B, green card assault with paper chase (http://www.computerworld.com/s/article/9135552/U.S._steps_up_H_1B_green_card_assault_with_paper_c hase)
It is better to consult attorney to handle it properly.
In my case, it was B.Sc + M.C.A (3 + 3) years education and applied it on EB2 Category. I know of a lot of cases with M.C.A approved on EB2 category. So, I am not sure if this would be reason for it.
while 4+ year degrees are for technology, engineering, agriculture, medicine.
UK (some parts of europe as well) and Australia seems to have similar system in some of its university.
even some US universities have rightly adopted the same
fsu.edu | degree in 3 (http://www.degreein3.fsu.edu/)
Degree in Three Program Description (http://www.ecu.edu/threeyeardegree/)
Panola College Degree in 3 Program (http://legacy.panola.edu/instruction/degree_3/index.html)
The point is the content is more important than the duration.
I personally think 3year UG unlikely reason for reopening I140 after GC is approved. I would be shocked if that is the case.
I am afraid this could be a paper chase. Asking more docs to creating headache for the applicant.
U.S. steps up H-1B, green card assault with paper chase (http://www.computerworld.com/s/article/9135552/U.S._steps_up_H_1B_green_card_assault_with_paper_c hase)
It is better to consult attorney to handle it properly.
In my case, it was B.Sc + M.C.A (3 + 3) years education and applied it on EB2 Category. I know of a lot of cases with M.C.A approved on EB2 category. So, I am not sure if this would be reason for it.
2011 Learn to draw graffiti letters
leoindiano
03-17 10:02 AM
Substitute labors for EB2 should not IMPACT the delay more than 3 to 6 months. The reason is total EB2 labor india cases approved with PD in 2004 itself is 3500(Straight out of DOL database, published on this forum last year). Some of these cases may have been substituted, worst case, lets say 100% of them applied to I-485. Now the number is 3 times that of 3500. that is 10500(including spouse and 1 child on average).
Another thing you need to consider is If anycase had a PD before sept 2004 and was filed for I-485 before July 2007. That must have got the approval unless there was a namecheck delay.
That should reduce the number to half., 5500(including dependent cases). This is my educated guess, Please dont pick on me. It wont help anybody.
Below are 3 categories left in 2004 as per my analysis....
1) the applications filed in or after july 2007 OR
2) applications had a PD after sept 2004
3) Namecheck delayed cases.
Another thing you need to consider is If anycase had a PD before sept 2004 and was filed for I-485 before July 2007. That must have got the approval unless there was a namecheck delay.
That should reduce the number to half., 5500(including dependent cases). This is my educated guess, Please dont pick on me. It wont help anybody.
Below are 3 categories left in 2004 as per my analysis....
1) the applications filed in or after july 2007 OR
2) applications had a PD after sept 2004
3) Namecheck delayed cases.
more...
lazycis
09-27 02:26 PM
Title 8 C.F.R. � 205.1(a) states, in pertinent part, that:
The approval of a petition or self-petition made under section 204 of the Act and in accordance with part 204 of this chapter is revoked as of the date of approval:
(3) If any of the following circumstances occur before the beneficiary’s or self-petitioner’s journey to the United States commences … (A) Upon written notice of withdrawal filed by the petitioner or self-petitioner with any officer of the Service who is authorized to grant or deny petitions.
You cannot port revoked petition, because it does not exist anymore.
The approval of a petition or self-petition made under section 204 of the Act and in accordance with part 204 of this chapter is revoked as of the date of approval:
(3) If any of the following circumstances occur before the beneficiary’s or self-petitioner’s journey to the United States commences … (A) Upon written notice of withdrawal filed by the petitioner or self-petitioner with any officer of the Service who is authorized to grant or deny petitions.
You cannot port revoked petition, because it does not exist anymore.
raj2007
06-17 02:32 AM
I am planning to apply for both Canadian Permanent Residency and US green card next month. Assuming that I get my Canadian Permanent Residency and US Greencard after two years, what options do I have to maintain the permanent resident status in both countries, so that I am eligible to apply for citizenship in both countries.
Some say that showing proof of residence in both countries, commuting between the countries for work (Windsor-Canada and Detroit-US) and paying taxes in both countries would suffice.
Please guide me on this.
How can you ride on 2 horses?:)
Canada needs 3yr PR for citizenship while US needs 5. I feel it wil be issue while border crossing. US is very strict and they may take GC away.Take canadian citizenship first and then apply here. Thay way you can have both.
Some say that showing proof of residence in both countries, commuting between the countries for work (Windsor-Canada and Detroit-US) and paying taxes in both countries would suffice.
Please guide me on this.
How can you ride on 2 horses?:)
Canada needs 3yr PR for citizenship while US needs 5. I feel it wil be issue while border crossing. US is very strict and they may take GC away.Take canadian citizenship first and then apply here. Thay way you can have both.
more...
plassey
08-13 10:48 AM
Congratulations but I was wondering if you are more an exception then a rule...:confused:
Yes, i opened a new thread so that everybody can see that CIS does mostly work on cases according to 485 Receipt Date. Otherwise i can't justify my EAD approval. I filed 485 and AP on June 18th and got RNs 2 weeks later. But EAD was filed later on July 12th. I got the receipt number for EAD from the back of my cashed check but never got actual Receipt Notice. Today i got the email that card production has been ordered.
So if they have to approve an EAD filed in mid July, they must have gone with the 485 Receipt date. There is an LUD for our APs too for this Sunday. I'm happy that they are processing the cases in somewhat FIFO order. I was expecting EAD only 3-4months later since i filed it along with the July flood of applications.
Dec2002 EB3 India.
Yes, i opened a new thread so that everybody can see that CIS does mostly work on cases according to 485 Receipt Date. Otherwise i can't justify my EAD approval. I filed 485 and AP on June 18th and got RNs 2 weeks later. But EAD was filed later on July 12th. I got the receipt number for EAD from the back of my cashed check but never got actual Receipt Notice. Today i got the email that card production has been ordered.
So if they have to approve an EAD filed in mid July, they must have gone with the 485 Receipt date. There is an LUD for our APs too for this Sunday. I'm happy that they are processing the cases in somewhat FIFO order. I was expecting EAD only 3-4months later since i filed it along with the July flood of applications.
Dec2002 EB3 India.
2010 Style graffiti tags blue
msyedy
01-25 06:03 PM
:D :D :D
That's hilarious.
But fun aside, you're right. Times of India makes it sound as if H1Bs pretty much run everything and create everything and that H1Bs are like rockstars or something.
One reason I never read Times of India is that they somehow have figured out to beat pop-up blockers and my screen fills up with pop ups for airlines agents and phone cards and its really irritating.
Secondly, their content is becoming like a tabloid's content would be.
I agree with you Logiclife.... When I call my parents in india, my father says
you should be getting your greencard soon, bush is giving greencards to legals.
Ab mai kya samjhaoon. Bush bhayya to sirf push ka naam lete hai magar
dam hi nahee Push karne ka.
Unko ab thode dinme gaddi se push kardiya jayega.
That's hilarious.
But fun aside, you're right. Times of India makes it sound as if H1Bs pretty much run everything and create everything and that H1Bs are like rockstars or something.
One reason I never read Times of India is that they somehow have figured out to beat pop-up blockers and my screen fills up with pop ups for airlines agents and phone cards and its really irritating.
Secondly, their content is becoming like a tabloid's content would be.
I agree with you Logiclife.... When I call my parents in india, my father says
you should be getting your greencard soon, bush is giving greencards to legals.
Ab mai kya samjhaoon. Bush bhayya to sirf push ka naam lete hai magar
dam hi nahee Push karne ka.
Unko ab thode dinme gaddi se push kardiya jayega.
more...
bigboy007
12-10 02:31 PM
bump^^^^^^^^^^^
hair graffiti letter h
tabletpc
11-29 11:35 PM
I had been procrastinating about Canada's immigration from almost a year.
yesterday i was kind of bored at work and decided to do something i had been postponing it form long time and motivated myself to apply for Canada's GC. it took me not more than 20 min to fill the application form.
2m i will send the application with fee..afterall what am i going to lose if tis getting precessed along with my US GC..???:)
Feel free to send me message if you need more information.
yesterday i was kind of bored at work and decided to do something i had been postponing it form long time and motivated myself to apply for Canada's GC. it took me not more than 20 min to fill the application form.
2m i will send the application with fee..afterall what am i going to lose if tis getting precessed along with my US GC..???:)
Feel free to send me message if you need more information.
more...
moonlight
06-20 12:54 PM
Better check with your lawyer. Becuase when you apply for 485 and get approved your wife's H4 status becomes illegal. So don't know exactly about H1 or H4 on advanced parole. Lawyer is the best person for your case.
hot Tags: Alphabet Graffiti
AirWaterandGC
05-12 10:09 AM
Thank you for taking action on AILA's Contact Congress website. If you'd like to get more involved in our advocacy efforts, please contact AILA's Manager of Grassroots Advocacy, Jenny Levy.
Your message was sent to:
Senator Richard J. Durbin (D-IL)
Senator Barack Obama (D-IL)
Representative J. Dennis Hastert (R-IL 14th)
This is a suggestion for members using AILA tool. While we appreciate AILA for creating these useful tools, IV is not part of this AILA campaign.
If you want to use the AILA tool. Use your own letter and not AILA letter. Make sure not to use words like 'H1B' and 'illegal/undocumented' in the letter. Lawmaker offices will look at it and will not even care to read it fully. They will assume it is for H1B increase or about illegal immigration. Sometimes you will get an automated reply that has nothing to do with your issues you raised in your letter.
There are some good letter templates in http://immigrationvoice.org/forum/showthread.php?t=3999
and some of them do not use H1B word at all. They are totally focussed on 'Green card'. You can choose to use any one of them. As we see the progress on CIR IV will have its own webfax and call the lawmakers campaign.
Your message was sent to:
Senator Richard J. Durbin (D-IL)
Senator Barack Obama (D-IL)
Representative J. Dennis Hastert (R-IL 14th)
This is a suggestion for members using AILA tool. While we appreciate AILA for creating these useful tools, IV is not part of this AILA campaign.
If you want to use the AILA tool. Use your own letter and not AILA letter. Make sure not to use words like 'H1B' and 'illegal/undocumented' in the letter. Lawmaker offices will look at it and will not even care to read it fully. They will assume it is for H1B increase or about illegal immigration. Sometimes you will get an automated reply that has nothing to do with your issues you raised in your letter.
There are some good letter templates in http://immigrationvoice.org/forum/showthread.php?t=3999
and some of them do not use H1B word at all. They are totally focussed on 'Green card'. You can choose to use any one of them. As we see the progress on CIR IV will have its own webfax and call the lawmakers campaign.
more...
house alphabet graffiti tag letter
c9411010
08-04 03:29 PM
guys many of us are considering going back to india.. any idea on whether those who have 40 credits will be eligible for social security from india...
also any adivice o what is the best way to transfer 401 to india.. withdraw immeditately or wait till 591/2 years..
also any adivice o what is the best way to transfer 401 to india.. withdraw immeditately or wait till 591/2 years..
tattoo Graffiti fonts Black White of
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
more...
pictures graffiti letters tag. sponsored links. How to Tag graffiti letters tag.
53885
05-12 07:44 PM
Sent 610 emails to media organizations in Western states (CA,OR,WA,AZ,NV) through AILA website.
dresses Graffiti / Tags: cool disco
americandesi
06-18 01:10 PM
All EB priority dates for July 2007 is current. Hence everyone can go for concurrent filing right away.
The scenario I have given explains how to maintain the status after getting permanent residency from both countries, so that you are eligible to apply for citizenship in both countries.
But here is the catch. Some Canadian immigration officers might not consider the commuting days towards the day count for citizenship. It solely depends on the discretion of the officer during Canadian citizenship interview.
The scenario I have given explains how to maintain the status after getting permanent residency from both countries, so that you are eligible to apply for citizenship in both countries.
But here is the catch. Some Canadian immigration officers might not consider the commuting days towards the day count for citizenship. It solely depends on the discretion of the officer during Canadian citizenship interview.
more...
makeup Graffiti Tag Letters
coolmanasip
03-22 10:54 AM
It should be safe to travel for both of you.....
I am exactly in the same situation.....EB2, I40 approved, PD June 2006, and filed 485 in the july 2007 mess... I changed my job immediately after 6 months passed in March 2008....I have not informed USCIS about job change (AC21)......and my port of entry was Washington DC (IAD) airport......
I have travellled twice using the AP, once in April 2008 and once in December 2009.....went through typical two step exit process from immigration......first time, I was asked who do I work for ---- I told the name of the new company and said I used to work for XX compnay (filing company).....no follow up questions or documents were asked for.....second time no questions at all.....
Both times, I got a feel from what they were checking is that all they check is whether your I-485 is pending or not in their system......
hope this helps...
Thanks....
I am exactly in the same situation.....EB2, I40 approved, PD June 2006, and filed 485 in the july 2007 mess... I changed my job immediately after 6 months passed in March 2008....I have not informed USCIS about job change (AC21)......and my port of entry was Washington DC (IAD) airport......
I have travellled twice using the AP, once in April 2008 and once in December 2009.....went through typical two step exit process from immigration......first time, I was asked who do I work for ---- I told the name of the new company and said I used to work for XX compnay (filing company).....no follow up questions or documents were asked for.....second time no questions at all.....
Both times, I got a feel from what they were checking is that all they check is whether your I-485 is pending or not in their system......
hope this helps...
Thanks....
girlfriend Graffiti alphabet gt;gt; alphabet
Rockford
07-17 02:44 PM
--
I couldn't help post a reply. I was trying not to add to the buzy server traffic.
Isn't it amazing, thousands of people are waiting with bated breath for the USCIS update news and some idiot opens a new threads to start a baseless rumor. And claims that news comes from Greg. This so called news as it turns out is a comment by some troll "south" on Greg's website.
Our friend here who opened this thread fails to even see the connection between the id handle "south" and his post" going south." Honestly, things like this make you wonder, how can such people call themselves highly skilled.
You will be proved biggest idiot when what you believe today is turned out to be wrong tomorrow. Who are you , a thread czar ?
If you don't like it, just move on.
That was an excerpt from some one then, but now I believe things are going south. Just don't make judgments about others without knowing every thing.
I couldn't help post a reply. I was trying not to add to the buzy server traffic.
Isn't it amazing, thousands of people are waiting with bated breath for the USCIS update news and some idiot opens a new threads to start a baseless rumor. And claims that news comes from Greg. This so called news as it turns out is a comment by some troll "south" on Greg's website.
Our friend here who opened this thread fails to even see the connection between the id handle "south" and his post" going south." Honestly, things like this make you wonder, how can such people call themselves highly skilled.
You will be proved biggest idiot when what you believe today is turned out to be wrong tomorrow. Who are you , a thread czar ?
If you don't like it, just move on.
That was an excerpt from some one then, but now I believe things are going south. Just don't make judgments about others without knowing every thing.
hairstyles Graffiti Buble Fonts Letters
akred
03-26 08:30 PM
Remember, all immigrants no matter where they came from, are ultimately legal immigrants once they pass through the system.
bluez25
07-15 01:09 PM
All,
Chennai Consulate has released the August appointment schedule on their site.
http://chennai.usconsulate.gov/uploads/images/K4oeM-zL_hPooV2orVvylA/ivappoint0808.pdf
I got an appointment too.. yahoooooooooo...
Chennai Consulate has released the August appointment schedule on their site.
http://chennai.usconsulate.gov/uploads/images/K4oeM-zL_hPooV2orVvylA/ivappoint0808.pdf
I got an appointment too.. yahoooooooooo...
prioritydate
09-21 11:27 PM
What if the employer showed XXX amount on the Labor Certification, and in the offer letter, but send an offer letter to the employee for YYY, where YYY < XXX? Does the employee is still obliged to for with the employer?
No comments:
Post a Comment